Expansion module For the Intellijel designed Quadra (Article Nr 440073 - not included, must be ordered separately), EOC (end of cycle) pulse outputs, Voltage control of attack and decay (with attenuators) of all four...
Interface Module Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
Housing for Eurorack modules 20 Slots, Power supply: +12 V / 1500 mA, -12 V / 1500 mA, +5 V / 1000 mA, External dimensions (W x H x D): 177.4 x 81.3 x 435.6 mm, Width inside: 2x 104 TE / HP, Height inside: 1x 3 HE, 1x...
Headphone and stereo output module L and R +4 dBv unbalanced line level outputs on TS 1/4″ Neutrik jacks, Switch mono / stereo monitoring, Left input normalled to right input, Individual level attenuators and...
Passive Logic Module Various logic sources (triggers, gates, etc.) can be merged to form a logical OR combination output, Width: 2 TE / HP, Depth: 18 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V)
Balanced TRS connectors for the Audio I/O 1U Width: 16 HP, Depth: 38 mm, Power requirement: +0 mA (+12 V) / -0 mA (-12 V) Note: Requires the Audio I/O 1U (Article Nr 440098 ) - not included, must be ordered separately...
Interface Module Interface for balanced line level (+4 dBu), 1x Balanced TRS 6.3 mm jack input path to Eurorack modular signal level, Width: 10 HP, Depth: 27 mm, Power requirement: +9 mA (+12 V) / -9 mA (-12 V)
USB Power Module Allows the supply of USB devices with 1A, Compatible with the TPS30 MAX and TPS80 backplanes, the TPS30MINI board requires an adapter, Width: 4 TE / HP
Interface Module 6.3 mm TS jack interface expander, Extension for the Intellijel Designs I/O 1U pedal (Article Nr 440173 - not included, must be ordered as a separate item), Width: 8 HP, Depth: 44 mm, Power...
Triple Active Attenuator Module 3 Modes per channel: active attenuator, bipolar attenuator, inverting attenuator, Width: 6 HP / HP, Depth: suitable for Skiff housing, Power requirement: +16 mA (+12 V) / -14 mA (-12 V)
Interface Module Interface for balanced line level (+4 dBu) signals, 4x 2-Stage LED VU meter for simultaneous monitoring of all inputs and outputs, Input path has a gain of up to 20 dB, Output path goes up to a nominal...
Wavefolder / Wave Shaper Fold's slider with CV input and attenuator controls the amount of wave convolution, Switch to select 2, 4 or 6 levels of folding, Also suitable for control voltages, Symmetry shifts the signal...
USB/DIN MIDI interface DIN or USB MIDI input, 2x Clock outputs, one with selectable divisions, Sequencer synchronisation via run and reset outputs, Precision 0-10 V note pitch output with pitch bend & portamento CC...
Analog Compressor Module Completely analog signal path, Sidchain with SVF filter - LP, BP and HP, Edcor transformers in the output stage provide a very good saturation behavior, Three different analog circuits: TUBE...
Spring Reverb Module Parametric EQ with frequency, Q-factor and gain controls, Limiter in feedback path prevents overriding of high level feedback, Switch to choose between three different connected tanks (one on the...